Publishers of technology books, eBooks, and videos for creative people

Home > Articles > Digital Photography > Adobe Photoshop Lightroom

Editing Essentials: How to Develop Your Photos in Lightroom

Intimidated by Lightroom's Develop module? Don't be. Scott Kelby shows you how to manipulate all of those scary-looking buttons, checkboxes, and sliders to improve your hard-to-fix photos.
This chapter is from the book

Everything we have done up to this point—every click of a button, every slide of a slider, every drag of a dragster, has all been leading up to this one single moment. The moment when you leave the relative safety and comfort of the Library module and venture into a wild, untamed territory that many seek but only few survive. This, my friends, is the Develop module—a scary and intimidating place with more complicated-looking buttons, checkboxes, and sliders than the Space Shuttle and a 747 combined. Now, if you’re thinking that all this looks too technical and advanced for you, you’re right. Nobody understands this module. I don’t know what it does. Adobe doesn’t know. I think a lot of the sliders are just put there for looks, and moving them doesn’t actually affect anything in the photo whatsoever. For example, try moving the Deflatulator slider all the way to the right. I’m not sure it really does anything, but it sure took the wind out of me. Okay, that was pretty lame, but wait—I have more. Open an image shot in RAW format, set your exposure and shadows, then try dragging the Cutlery Sharpening Amount to 75%. I’ll bet your image still looks dull, and it just doesn’t cut it. Are you getting any of these puns? I hope you are, because I swear, they’re cracking me up.

Setting Your White Balance in the Develop Module

You take a photo into the Develop module when you’ve got some serious adjusting to do, so don’t be fooled by the fact that the top panel in the right side Panels area is named “Basic.” Those “Basic” controls are more advanced than the controls found in Adobe Photoshop CS2/CS3’s acclaimed Camera Raw plug-in, so I vote that they be renamed “Essentials” or “Critical,” because the term Basic is a bit misleading. We’re going to start with perhaps the most essential Develop module setting: white balance.

  • Step One. Before you dive into this chapter, make darn sure you read the previous chapter (Quick Develop), because many of the tools you’re going to use here were explained in detail there. If you 100% for sure read that chapter, then charge ahead! Go to Photoshop Lightroom’s Library module and click on a photo you want to do some serious adjusting to, then click on the word Develop at the top right of the interface, or better yet just press the letter D on your keyboard, to jump over into the Develop module. (By the way, the model shown here is Debbie Stephenson, NAPP’s seminar tour team leader, and I took this shot live onstage during the Los Angeles leg of my Photoshop Power Tour seminar.)
  • Step Two. Like the Quick Develop panel, the Basic panel lets you set the white balance using either the WB pop-up menu or by adjusting the Temp and Tint sliders, shown circled here. If you forget which way to drag to make a photo warmer or cooler, look at the color bar inside the slider itself for a visual clue. Both sliders show the color you’ll get if you drag in either direction (if you wanted to warm the photo, you’d drag the Temp slider to the right toward yellow; to cool it, you’d drag left toward blue, as shown).
  • Step Three. Just to see how it works, go ahead and drag the Temp slider to the right, and watch how the photo warms up. It works the same way in Quick Develop, but there if you forget which way to click, you’re on your own. Now, let’s reset the Temp slider to its original location by double-clicking directly on the slider control knob itself. By the way, this little “double-click to reset the slider” trick works for most of the adjustment sliders in the Develop module, so this is a really good tip to remember.
  • Step Four. Okay, so the WB pop-up menu is used the same here as in Quick Develop, and the Temp and Tint sliders still adjust the color temperature, but the big advantage here in the Develop module is the White Balance Selector tool (it’s that huge eyedropper that lives in the top-left corner of the Basic panel, as you can see in the previous step). To use it, you can just click on it and your cursor changes to that tool (as shown here).
  • Step Five. As you move the White Balance Selector tool over your image, a pixel magnifier appears (as shown here) called the “Loupe” (named thus just to make things a little more confusing). This Loupe shows you a highly magnified view of the pixels your cursor is hovering over. It also displays the RGB readings of those pixels, measured from 0% (solid black) to 100% (solid white). So, to set your white balance with this tool, first you’d need to find a neutral area within your photo (ideally a light gray area). I usually try and find a light gray area where all three readouts (R, G, and B) are right around 60 to 65%. Chances are you won’t be able to get all three readouts to be exactly the same number, but at least if they’re close, you’ll know you’re in the ballpark.
  • Step Six. Once you find a neutral light gray area, just click once (as shown here) and it sets an accurate white balance (more on this in a moment). Before we go on, in the toolbar below the center Preview area there are options for the White Balance Selector tool, but they only appear while you have the tool selected. First, you can change the level of magnification by clicking-and-dragging the Scale slider (shown circled here). Perhaps more importantly, you can make the Loupe (a.k.a. the annoying Loupe) go away by turning off a simple checkbox. Also, when you do click within your photo, it instantly returns the White Balance Selector tool to its home in the Basic panel. If you’d like the option of trying other neutral areas to see how they look without having to grab the tool again every single time, just turn off the Auto Dismiss checkbox. Then, when you’re done, either return the tool to the Basic panel or click the Done button in the toolbar.
  • Step Seven. Okay, now before you go clicking away, how would you like a live preview of how your white balance setting will affect your photo before you even click it? Well, get the White Balance Selector tool, move it over an area of your photo (here I’m hovering it over the left side of Debbie’s hair), then take a look over at the Navigator panel at the top of the left side Panels area. You’ll see a live white balance preview as you hover the tool over different parts of the image. That way, you can see if the area where you’re thinking of clicking will actually make your photo look warmer or cooler. In the example shown here, you can see in the Navigator panel that the photo would look much cooler (bluer) if I were to click in her hair (which obviously isn’t a light gray).
  • Step Eight. Now, here’s the thing about white balance: you can find a perfectly neutral light gray area, choose that to set your white balance, and you’ll have an accurate white balance. But accurate doesn’t necessarily look good. Your grays might be dead on, but your flesh tones might look dead awful. That’s why many wedding and portrait photographers (who prefer that their subjects have a warm skin tone) use special lens accessories (like the ExpoDisc Digital White Balance Filter – Portrait) or intentionally warmer gray cards (called “warm cards”) that leave your subject’s skin with a warmer look. The bottom line is white balance is a creative decision made by you, the photographer, so if you use the White Balance Selector tool properly, and you think your subject looks too cool, then just drag the Temp slider slowly to the right a little bit until it looks right to you.
  • Step Nine. When I’m setting the white balance using the White Balance Selector tool, I usually try clicking in a few different neutral areas just to see how they differ. Sometimes, clicking just a few pixels away from your first choice can give you a slightly cooler or warmer white balance. In the example shown here, I made three virtual copies of our photo, and clicked the White Balance Selector tool in slightly different places in each one, so I could compare the four versions side-by-side in Survey view and choose the one I like best. By the way, virtual copies are just that—they’re not real copies of your photo (that would eat up too much hard drive space). Instead they’re just virtual “metadata only” versions of your original photo, which are great for experimenting with different techniques (like different white balance settings) without ballooning the size of your photo library. If you like the adjustments you made to a virtual copy, you can choose to apply them to the real photo when you export it. Cool, eh?
  • Step Ten. To create a virtual copy of your real photo, just Control-click (PC: Right-click) on your photo, and choose Create Virtual Copy from the contextual menu that appears (as shown here). By the way, you can also do this in the Library’s Grid view or in the filmstrip. Your virtual copy is automatically stacked with your real photo in the Library module’s grid, so finding these virtual copies is easy. Plus, the Grid view and filmstrip thumbnails for virtual copies have a small curled page icon in the bottom-left corner (shown circled in red in the inset) to let you know you’re not working on the real photo. You can create as many virtual copies as you’d like, because they don’t add any file size to your photo library.
  • Step Eleven. Don’t ever hesitate to try different white balance settings, because you can always return to the original “as shot” white balance setting by either choosing As Shot from the WB pop-up menu (as shown here), or by double-clicking on the letters “WB” (shown circled here) which appear to the right of the White Balance Selector tool in the Basic panel. Of course, if you ever just want to start over, and return the photo to how it looked when you imported it, just click the Reset button at the bottom of the right side Panels area. By the way, this Reset button is always there while you’re working in the Develop module, so anytime you want to start over just click on it and all your Develop module changes are undone.
  • Step Twelve. The bottom line is this: white balance is a creative decision made by you, the photographer, so if you use the White Balance Selector tool and think your subject looks too cool, then just drag the Temp slider slowly to the right a little bit until it looks right to you. Okay, now let’s set our white balance. Find a neutral gray area (I chose a light gray area of the background), and click once on that area. Although the photo looks “technically” accurate, in real life Debbie’s skin is quite tan, so to match what she looks like in person, drag the Temp slider slowly to the right until the skin tone looks warmer (as shown). The most important thing is not that the white balance is accurate or that the RGB numbers add up. It’s that your subject looks at least as good, if not better, in the final print as they do in person, and that’s a call that only you can make. Now, on to the rest of the Basic panel (see, I told you the name “Basic” was misleading).

Peachpit Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Peachpit and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Peachpit products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email ask@peachpit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.peachpit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020