Publishers of technology books, eBooks, and videos for creative people

Home > Articles

This chapter is from the book

Twenty tips for shooting great video

With your camcorder of choice in hand, it’s time to venture off and shoot videos. If you’re new to videography, following these tips will help you create better videos. If you’re an old hand, think of this list as a way to snap out of your routine and juice things up a bit. Here are my shooting axioms:

  • Get a closing shot
  • Get an establishing shot
  • Shoot plenty of video
  • Adhere to the “rule of thirds”
  • Keep your shots steady
  • Follow action
  • Use trucking shots
  • Find unusual angles
  • Lean forward or backward
  • Get wide and tight shots
  • Shoot matched action
  • Get sequences
  • Avoid fast pans and snap zooms
  • Shoot cutaways
  • Don’t break the “plane”
  • Use lights
  • Grab good “bites”
  • Get plenty of natural sound
  • Stripe your tapes
  • Plan your shoot

Get a closing shot

Your closing images are what stick in people’s minds. You should be constantly on the lookout for that one shot or sequence that best wraps up your story.

NBC-TV feature reporter Bob Dotson (see Lesson 5 for his story creation tips) and his photographer never fail to find a closing shot. It could be as simple as someone closing a door, capping a pen, petting a dog, turning out the lights, or releasing a butterfly from their cupped hands. If you happen to see a Dotson feature story, consider its close. It’s sure to be memorable.

Get an establishing shot

An establishing shot sets a scene in one image. Although super-wide shots work well (aerials in particular), consider other points of view: from the cockpit of a race car, a close-up of a scalpel with light glinting off its surface, or paddles dipping frantically in roaring white water. Each grabs the viewer’s attention and helps tell your story.

Shoot plenty of video

Videotape is cheap and expendable. Shoot a whole lot more raw footage than you’ll put in your final production. Five times as much is not unusual. Giving yourself that latitude might help you grab shots you would have missed otherwise.

Adhere to the rule of thirds

It’s called the “Rule of Thirds” but it’s more like the rule of four intersecting lines. When composing your shot, think of your viewfinder as being crisscrossed by two horizontal and two vertical lines. The center of interest should fall along those lines or near one of the four intersections, not the center of the image.

Consider all those family photos where the subject’s eyes are smack dab in the center of the photo. Those are not examples of good composition.

Another way to follow the rule of thirds is to look around the viewfinder as you shoot, not just stare at its center. Check the edges to see whether you’re filling the frame with interesting images. Avoid large areas of blank space.

Keep your shots steady

You want to give viewers the sense that they’re looking through a window or, better yet, are there on location. A shaky camera shatters that illusion.

When possible, use a tripod. The best sticks have fluid heads that enable you to make smooth pans or tilts.

If it’s impractical to use a tripod try to find some way to stabilize the shot: lean against a wall, put your elbows on a table, or place the camcorder on a solid object.

Follow action

This might seem obvious, but keep your viewfinder on the ball (or sprinter, speeding police car, surfer, conveyor belt, and so on). Your viewers’ eyes will want to follow the action, so give them what they want.

One nifty trick is to use directed movement as a pan motivator. That is, follow a leaf’s progress as it floats down a stream and then continue your camera motion past the leaf—panning—and widen out to show something unexpected: a waterfall, a huge industrial complex, or a fisherman.

Use trucking shots

Trucking or dolly shots move with the action. For example: hold the camera at arm’s length right behind a toddler as he motors around the house, put the camera in a grocery cart as it winds through the aisles, or shoot out the window of a speeding train.

Find unusual angles

Getting your camcorder off your shoulder, away from eye level, leads to more interesting and enjoyable shots. Ground-level shots are great for gamboling lambs or cavorting puppies. Shoot up from a low angle and down from a high angle. Shoot through objects or people while keeping the focus on your subject.

Lean forward or backward

The zoom lens can be a crutch. A better way to move in close or away from a subject is simply to lean in or out. For example, start by leaning way in with a tight shot of someone’s hands as he works on a wood carving; then, while still recording, lean way back (perhaps widening your zoom lens as well) to reveal that he is working in a sweatshop full of folks hunched over their handiwork.

Get wide and tight shots

Our eyes work like medium angle lenses. So we tend to shoot video that way. Instead, grab wide shots and tight shots of your subjects. If practical, get close to your subject to get the tight shot rather than use the zoom lens. Not only does it look better but that proximity leads to clearer audio.

Shoot matched action

Consider a shot from behind a pitcher as he throws a fastball. He releases it, then it smacks into the catcher’s glove. Instead of a single shot, grab two shots: a medium shot from behind the pitcher showing the pitch and the ball’s flight toward the catcher, and a tight shot of the catcher’s glove. Same concept for an artist: get a wide shot of her applying a paint stroke to a canvas, then move in for a close shot of the same action. You’ll edit them together to match the action.

Get sequences

Shooting repetitive action in a sequence is another way to tell a story, build interest or create suspense. A bowler wipes his hands on a rosin bag, dries them over a blower, wipes the ball with a towel, picks the ball up, fixes his gaze on the pins, steps forward, swings the ball back, releases it, slides to the foul line, watches the ball’s trajectory, and then reacts to the shot. Instead of simply capturing all this in one long shot, piecing these actions together in a sequence of edits is much more compelling. You can easily combine wide and tight shots, trucking moves, and matched action to turn repetitive material into attention-grabbing sequences.

Avoid fast pans and snap zooms

These moves fall into MTV and amateur video territory. Few circumstances call for such stomach-churning camerawork. In general, it’s best to minimize all pans and zooms. As with a shaky camera, they remind viewers that they’re watching TV.

If you do zoom or pan, do it for a purpose: to reveal something, to follow someone’s gaze from his or her eyes to the subject of interest, or to continue the flow of action (as in the floating leaf example earlier). A slow zoom in, with only a minimal change to the focal length, can add drama to a sound bite. Again, do it sparingly.

Shoot cutaways

Avoid jump cuts by shooting cutaways. A jump cut is an edit that creates a disconnect in the viewer’s mind. A cutaway—literally a shot that cuts away from the current shot—fixes jump cuts.

Cutaways are common in interviews where you might want to edit together two 10-second sound bites from the same person. Doing so would mean the interviewee would look like he suddenly moved. To avoid that jump cut—that sudden disconcerting shift—you make a cutaway of the interview. That could be a wide shot, a hand shot, or a reverse-angle shot of the interviewer over the interviewee’s shoulder. You then edit in the cutaway over the juncture of the two sound bites to cover the jump cut.

The same holds true for a soccer game. It can be disconcerting simply to cut from one wide shot of players on the field to another. If you shoot some crowd reactions or the scoreboard, you can use those cutaways to cover up what would have been jump cuts.

Don’t break the plane

This avoids another viewer disconnect. If you’re shooting in one direction, you don’t want your next shot to be looking back at your previous camera location. For instance, if you’re shooting an interview with the camera peering over the left shoulder of the interviewer, you want to shoot your reverse cutaways behind the interviewee and over his right shoulder. That keeps the camera on the same side of the plane—an imaginary vertical flat surface running through the interviewer and interviewee.

To shoot over your interviewee’s left shoulder would break that plane, meaning the viewer would think the camera that took the previous shot should somehow be in view.

In general, you want to keep all your camera positions on one side of that plane, even when shooting large-scale events like football games. Otherwise viewers may lose track of the direction of play

There are exceptions. Consider videotaping a rock group performance. Camera crewmembers typically scramble all over the stage, grabbing shots from multiple angles, and frequently appear on camera themselves.

Use lights

Lights add brilliance, dazzle, and depth to otherwise bland and flat scenes. Consider using an onboard camcorder fill light and, if you have the time, money, patience, or personnel, a full lighting kit with a few colored gels. In a pinch, do whatever you can to increase available light. Open curtains, turn on all the lights, or bring a couple of desk lamps into the room. One caveat: Low-light situations can be dramatic, and flipping on a few desk lamps can destroy that mood in a moment.

Grab good “bites”

Your narrator presents the facts. The people in your story present the emotions, feelings, and opinions. Don’t rely on interview sound bites to tell the who, what, where, when and how. Let those bites explain the “why.”

In a corporate backgrounder, have the narrator say what a product does and let the employees or customers say how enthusiastic they are about that product.

Your narrator should be the one to say, “It was opening night and this was her first solo.” Let the singer, who is recalling this dramatic moment, say, “My throat was tight and my stomach was tied in knots.”

In general, even though your interviews might take forever, use only short sound bites in your final production. Use those bites as punctuation marks, not paragraphs.

Get plenty of natural sound

Think beyond images. Sound is tremendously important. Listen for sounds you can use in your project. Even if the video quality is mediocre, grab that audio. Your camcorder’s onboard mic is not much more than a fallback. Consider using additional mics: shotgun mics to narrow the focus of your sound and avoid extraneous noise, lavalieres tucked out of sight for interviews, and wireless mics when your camera can’t be close enough to get just what you need.

Stripe your tapes

Premiere Pro can automate much of the video capture process. But if your DV (digital video) tape has a gap in its timecode, automated capture might not work.

Gaps typically occur when you eject a partially recorded tape and then reinsert it. That resets the timecode to zero and can leave an unrecorded portion on the tape. Either of these means Premiere Pro won’t be able to automatically capture clips you’ve logged.

Striping your tapes before shooting resolves this issue. You can stripe tapes by placing a fresh tape in your camcorder, capping your lens, pressing Record, and waiting for your camcorder to record the entire tape.

This lays down a continuous timecode from beginning to end and ensures that there will be no duplicate timecodes or breaks in the timecode on the tape.

Rewind the tape and you’re ready to go. Now, as you use your camcorder, it’ll record new video over the black video you taped but won’t change the timecode.

Plan your shoot

When you consider a video project, plan what you need to shoot to tell the story. Videotaping your kid’s soccer championship match, a corporate backgrounder, or a medical procedure each require planning to ensure success. Know what you want your final video project to say and think of what you need to videotape to tell that story.

Even the best-laid plans and most carefully scripted projects might need some adjusting once you start recording in the field. No matter how you envision the finished project, be willing to make changes as the situation warrants.

Peachpit Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Peachpit and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Peachpit products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email ask@peachpit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.peachpit.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020