Publishers of technology books, eBooks, and videos for creative people

Home > Articles > Design > Adobe Photoshop

  • Print
  • + Share This
This chapter is from the book

Using the Radial Filter tool

With the Radial Filter tool, you define an elliptical area with an overlay, then apply adjustments via sliders to the area either inside or outside the overlay.

To darken an area of a photo via the Radial Filter tool: star.jpg

  1. After adjusting your photo via the Basic and Tone Curve tabs, A click the Radial Filter tool c0088-01.jpg (J). The sliders for the tool display.
    f0088-01.jpg

    Click to view larger image

    A Although the exposure in this photo is well balanced, we want to spotlight the spa products more.

  2. Click the + or – button for any slider to “zero out” all the sliders except the one you click. At the bottom of the panel, click Effect: Outside or Inside to control where the filter effect will occur relative to the overlay you will draw in the next step.
  3. Drag over an area in the photo to produce an overlay. B If you want to reposition the overlay as you create it, drag with the Spacebar held down.
    f0088-02.jpg

    Click to view larger image

    B We zeroed out the sliders for the Radial Filter tool, then dragged in the preview to create an overlay.

  4. Use any of the sliders to adjust the filtered area (A–C, next page). If the Effect setting is Outside, the adjustment will be at full strength outside the overlay, then diminish gradually to no adjustment at the dashed border. If the Effect setting is Inside, the adjustment will be at full strength at the center of the overlay and diminish gradually to no adjustment at the dashed border.
    f0089-01.jpg

    Click to view larger image

    A We used the first four sliders to darken the filtered area and the Clarity and Sharpness sliders to soften the image details.

    f0089-02.jpg

    B To make the lighting in the darkened areas cooler, we reduced the Temperature value (added blue).

    f0089-03.jpg

    Click to view larger image

    C The tonal, temperature, and sharpness adjustments help to accentuate the candle, soap, and white bottle.

  5. To control how gradual the adjustment is at the edge of the overlay, use the Feather slider.
  6. To hide the overlay(s) to gauge the adjustment, uncheck Show Overlay or press V. Redisplay the overlay for the next step.
  7. To edit the overlay, do any of the following (all optional):

    To reposition the overlay, drag inside it.

    To reshape the overlay, drag one of the handles.

    To resize the overlay, Shift-drag a handle.

    To swap the adjustment from Outside to Inside the overlay, or vice versa, click the unselected Effect button or press X.

  8. Optional: To add another overlay, click New, then follow steps 2–7. Be aware that the adjustment will be cumulative where the overlays overlap. When there are multiple overlays, you need to click the pin of the one you want to edit. To delete a selected overlay, press Backspace/Delete.
  9. To redisplay the main tabs, press H (Hand tool).

    • To expand an overlay to the edges of a photo, double-click inside it. To produce a new overlay that does the same thing, double-click in the preview.
  • + Share This
  • 🔖 Save To Your Account