Publishers of technology books, eBooks, and videos for creative people

Home > Articles > Digital Photography

  • Print
  • + Share This
This chapter is from the book

S: Shutter Priority Mode


S mode is what photographers commonly refer to as Shutter Priority. Just as its name implies, it is the mode that prioritizes, or places major emphasis on, the shutter speed above all other camera settings.

Like Program mode, Shutter Priority mode gives us more freedom to control certain aspects of our photography. In this case, we are talking about shutter speed. The shutter speed determines how long your camera’s sensor is exposed to light. The longer the shutter remains open, the more time your sensor has to gather light. The shutter speed also, to a large degree, determines how sharp your photographs are. This is different from the image being sharply in focus. One of the major influences on the sharpness of an image is the blurring that is caused by camera shake and the subject’s movement. Because a slower shutter speed means that light from your subject is hitting the sensor for a longer period of time, any movement by you or your subject will show up in your photos as blur.

When to Use Shutter Priority Mode

  • When working with fast-moving subjects where you want to freeze the action (Figure 4.3); much more on this in Chapter 5
    Figure 4.3

    Figure 4.3. Even the fastest of subjects can be frozen with the right shutter speed.

  • When you want to emphasize movement in your subject with motion blur (Figure 4.4)
    Figure 4.4

    Figure 4.4. Slowing down the shutter speed and following the motion conveys a sense of movement in the shot.

  • When you want to use a long exposure to gather light over a long period of time (Figure 4.5); more on this in Chapter 8
    Figure 4.5

    Figure 4.5. With a long enough exposure, moonlight can look like daylight.

  • When you want to create that silky-looking water in a waterfall (Figure 4.6)
    Figure 4.6

    Figure 4.6. Increasing the length of the exposure gives moving water a misty look.

As you can see, the subject of your photo usually determines whether or not you will use Shutter Priority mode. It is important that you can visualize the result of using a particular shutter speed. The great thing about shooting with digital cameras is that you get instant feedback by viewing your shot on the rear LCD monitor. But what if your subject won’t give you a do-over? Such is often the case when shooting sporting events. It’s not like you can ask the quarterback to throw that touchdown pass again because your last shot was blurry from a slow shutter speed. This is why it’s important to know what those speeds represent in terms of their ability to stop the action and deliver a blur-free shot.

First, let’s examine just how much control you actually have over the shutter speeds. The D600 has a shutter speed range from 1/4000 of a second all the way down to 30 seconds. With that much latitude, you should have enough control to capture almost any subject. The other thing to think about is that Shutter Priority is considered a “semi-automatic” mode. This means that you are taking control over one aspect of the total exposure while the camera handles the other. In this instance, you are controlling the shutter speed and the camera is controlling the aperture. This is important, because there will be times that you want to use a particular shutter speed but your lens won’t be able to accommodate your request.

For example, you might encounter this problem when shooting in low-light situations. If you are shooting a fast-moving subject that will blur at a shutter speed slower than 1/125 of a second and your lens’s largest aperture is f/3.5, you might find that your aperture display in the viewfinder and the control panel will blink. This is your warning that there won’t be enough light available for the shot—due to the limitations of the lens—so your picture will be underexposed. It does not, however, prevent you from taking the shot, so you need to be aware of the warning and the results.

Another case where you might run into this situation is when you are shooting moving water. To get that look of silky, flowing water, it’s usually necessary to use a shutter speed of at least 1/15 of a second. If your waterfall is in full sunlight, you may see the aperture readout blink because the lens you are using only stops down to f/22 at its smallest opening. In this instance, your camera is warning you that you will be overexposing your image. There are workarounds for these problems, which we will discuss later (see Chapter 7 for all the details), but it is important to know that there can be limitations when using Shutter Priority mode.

Setting Up and Shooting in Shutter Priority Mode

  1. Turn your camera on. Press the Mode dial release lock, and turn the Mode dial to align the S with the indicator line.
  2. Set your ISO by pressing the ISO button; select the appropriate setting by looking at the ISO readout on the control panel or by pressing the Info button on the back of the camera and looking at the info display on the rear LCD monitor.
  3. Once your ISO is set, point the camera at your subject, and then activate the camera meter by depressing the shutter button halfway.
  4. View the exposure information in the bottom area of the viewfinder or in the control panel.
  5. While the meter is activated, use your thumb to roll the Main Command dial left and right to see the changed exposure values. Roll the dial to the right for faster shutter speeds and to the left for slower speeds.
  • + Share This
  • 🔖 Save To Your Account