␡
- 1-1 Introduction
- 1-2 Starting a New Drawing
- 1-3 SolidWorks Colors
- 1-4 Creating a Fully Defined Circle
- 1-5 Units
- 1-6 Rectangle
- 1-7 Moving Around the Drawing Screen
- 1-8 Orientation
- 1-9 Sample Problem SP1-1
- 1-10 Creating 3D Models
- 1-11 Saving a Document
- 1-12 Lines and Angles – Sample Problem SP1-2
- 1-13 Holes
- Chapter Projects
This chapter is from the book
This chapter is from the book
This chapter is from the book
This chapter is from the book
1-10 Creating 3D Models
The fully defined shape shown in Figure 1-29 can now be used to create a 3D model.
To Create a 3D Model
Click the Features tab.
Click the Extrude Boss/Base tool.
See Figure 1-30. The shape will change orientation to the Trimetric format. The sketch was created on the Front Plane.
)
){kind=link}
Define the depth as 20 mm.
Click the green OK check mark.
Click the drawing screen.