␡
- 1-1 Introduction
- 1-2 Starting a New Drawing
- 1-3 SolidWorks Colors
- 1-4 Creating a Fully Defined Circle
- 1-5 Units
- 1-6 Rectangle
- 1-7 Moving Around the Drawing Screen
- 1-8 Orientation
- 1-9 Sample Problem SP1-1
- 1-10 Creating 3D Models
- 1-11 Saving a Document
- 1-12 Lines and Angles – Sample Problem SP1-2
- 1-13 Holes
- Chapter Projects
This chapter is from the book
This chapter is from the book
This chapter is from the book
This chapter is from the book
1-11 Saving a Document
See Figure 1-31.
)
To Save a Document
Click the File tab at the top of the drawing screen.
A drop-down menu will appear.
Click the Save As tool.
The Save As dialog box will appear. See Figure 1-32.
)
Enter the File name.
In this example the name BLOCK was used.
Click the Save box.