- Viewing Photoshop CS2 objects, commands, and methods
- Creating new objects in a script
- Setting the active object
- Opening a document
- Saving a document
- Setting application preferences
- Suppressing dialog boxes
- Working with the Adobe Photoshop CS2 Object Model
- Working with color objects
- Working with filters
- Understanding clipboard interaction
- Working with units
- Advanced scripting
Working with the Adobe Photoshop CS2 Object Model
This section contains information about using the objects in the Adobe Photoshop CS2 Object Model. For information on object models, see “Object model concepts” on page 7 and “Adobe Photoshop CS2’s Object Model” on page 9.
Using the Application object
This section describes how and when to use the Application object in a script. It also describes how to use some properties of the Application object.
You use the properties and methods of the Application object to work with Adobe Photoshop CS2 functionality and objects such as the following:
- Global Adobe Photoshop CS2 settings or preferences, such as unit values or color settings. See “Setting application preferences” on page 32.
- Documents— You can add or open documents and set the active document. See “Opening a document” on page 30 and “Setting the active object” on page 28.
- Actions— You can execute actions created either via scripting or using the Actions palette in the Adobe Photoshop CS2 application.
You can use Application object properties to get information such as the following:
- A list of fonts installed on the system:
- var fontstInstalled = app.fonts
- The amount of unused memory available to Adobe Photoshop CS2.
- The location of the Presets folder.
Using the Document object
The Document object can represent any open document in Adobe Photoshop CS2. You can think of a Document object as a file; you can also think of it as a canvas. You work with the Document object to do the following:
- Access script objects contained in the Document object, such as ArtLayer or Channel objects. See “Containment hierarchy” on page 8 and “Adobe Photoshop CS2’s Object Model” on page 9 for more information.
- Manipulate a specific Document object. For example, you could crop, rotate or flip the canvas, resize the image or canvas, and trim the image. See “Manipulating a Document object” on page 35 for a demonstration.
- Get the active layer. See “Setting the active layer” on page 29.
- Save the current document. See “Saving a document” on page 31.
- Copy and paste within the active document or between different documents. See “Understanding clipboard interaction” on page 46.
Manipulating a Document object
The following example demonstrates how to do the following:
- Change the size of the image to 4 inches wide and 4 inches high.
- Change the size of the document window (or canvas) to 5 inches high and 6 inches wide.
- Trim the top and bottom of the image.
- Crop the image.
- Flip the entire window.
//this sample script assumes the ruler units have been set to inches docRef.resizeImage( 4,4 ) docRef.resizeCanvas( 4,4 ) docRef.trim(TrimType.TOPLEFT, true, false, true, false) //the crop command uses unit values //change the ruler units to pixels app.preferences.rulerUnits =Units.PIXELS docRef.crop (new Array(10,20,40,50), 45, 20, 20, 72) docRef.flipCanvas(Direction.HORIZONTAL)
Working with layer objects
The Adobe Photoshop CS2 object model contains two types of layer objects:
- ArtLayer objects, which can contain image contents and are basically equivalent to Layers in the Adobe Photoshop CS2 application.
- Layer Set objects, which can contain zero or more ArtLayer objects.
When you create a layer you must specify whether you are creating an ArtLayer or a Layer Set object.
Creating an ArtLayer object
The following example demonstrates how to create an ArtLayer object filled with red at the beginning of the current document.
// Create a new art layer at the beginning of the current document var layerRef = app.activeDocument.artLayers.add() layerRef.name = "MyBlendLayer" layerRef.blendMode = BlendMode.NORMAL // Select all so we can apply a fill to the selection app.activeDocument.selection.selectAll // Create a color to be used with the fill command var colorRef = new SolidColor colorRef.rgb.red = 255 colorRef.rgb.green = 100 colorRef.rgb.blue = 0 // Now apply fill to the current selection app.activeDocument.selection.fill(colorRef)
The following example shows how to create a Layer Set object after the creating the first ArtLayer object in the current document:
// Get a reference to the first layer in the document var layerRef = app.activeDocument.layers // Create a new LayerSet (it will be created at the beginning of the // document) var newLayerSetRef = app.activeDocument.layerSets.add() // Move the new layer to after the first layer newLayerSetRef.move(layerRef, ElementPlacement.PLACEAFTER)
Referencing ArtLayer objects
When you create a layer in the Adobe Photoshop CS2 application (rather than a script), the layer is added to the Layers palette and given a number. These numbers act as layer names and do not correspond to the index numbers of ArtLayer objects you create in a script.
You can use the following syntax to refer to the layers by the names given them by the Application:
layers["Layer 3"].select() //using the collection name and square brackets for the collection
Working with layer set objects
Existing layers can be moved into layer sets. The following example shows how to create a Layer Set object, duplicate an existing ArtLayer object, and move the duplicate object into the layer set.
var layerSetRef = docRef.layerSets.add() var layerRef = docRef.artLayers.duplicate(layerSetRef, ElementPlacement.PLACEATEND) layerRef.moveToEnd (layerSetRef)
Linking Layer Objects
Scripting also supports linking and unlinking layers. You link layers together so that you can move or transform the layers in a single statement.
var layerRef1 = docRef.artLayers.add() var layerRef2 = docRef.artLayers.add() layerRef1.link(layerRef2)
Look up link() in the Methods table of the ArtLayer object in Part 2 of this book. Additionally, look up add() in the Methods table of the ArtLayers object.
Applying styles to layers
Your script can apply styles to an ArtLayer object. To apply a style in a script, you use the applyStyle() method with the style’s name as an argument enclosed in straight double quotes.
Please refer to Adobe Photoshop CS2 Help for a list of styles and for more information about styles and the Styles palette.
The following example sets the Puzzle layer style to the layer named “L1.”
Look up applyStyle() in the Methods table of the ArtLayer object in Part 2 of this book.
Using the Text Item object
You can change an existing ArtLayer object to a text layer, that is, a Text Item object, if the layer is empty. Conversely you can change a Text Item object to an ArtLayer object. This “reverse” procedure rasterizes the text in the layer object.
The Text Item object is a property of the ArtLayer object. However, to create a new text layer, you must create a new ArtLayer object and then set the art layer’s kind property to LayerKind.TEXT.
To set or manipulate text in a text layer, you use the textItem object, which is also a property of the ArtLayer object.
Creating a Text Item object
The following examples create an ArtLayer object and then use the kind property to convert it to a text layer.
var newLayerRef = docRef.artLayers.add() newLayerRef.kind = LayerKind.TEXT
See “Adobe Photoshop CS2’s Object Model” on page 9 for information on the relationship between ArtLayer objects and TextItem objects.
Also, look up the kind and TextItem properties of the ArtLayer object in Part 2 of this book.
Determining a layer’s kind
The following example uses an if statement to check whether an existing layer is a text layer.
if (newLayerRef.kind == LayerKind.TEXT)
Adding and manipulating text in a text item object
The following example adds and right-justify text in a text layer.
var textItemRef = artLayers["my text"].textItem textItemRef.contents = "Hello, World!" docRef.artLayers["my text"].textItemRef.justification = Justification.RIGHT
To familiarize yourself with this objects, properties, and methods, look up the TextItem property of the ArtLayer object in Part 2 of this book. To find the properties and methods you can use with a text layer, look up the TextItem object.
Working with Selection objects
You create a Selection object to allow your scripts to act only on a specific, selected section of your document or a layer within a document. For example, you can apply effects to a selection or copy the current selection to the clipboard.
The Selection object is a property of the Document object. In Part 2 of this book, look up selection in the Properties table for the Document object. Also, look up the select in the Methods table for the Selection object.
Creating and defining a selection
To create a selection, you use the select() method of the Selection object.
You define a Selection object by specifying the coordinates on the screen that describe the selection’s corners. Since your document is a 2-dimensional object, you specify coordinates using the x-axis and y-axis as follows:
- You use the x-axis to specify the horizontal position on the canvas.
- You use the y-axis to specify the vertical position on the canvas.
The origin point in Adobe Photoshop CS2, that is, x-axis = 0 and y-axis = 0, is the upper left corner of the screen. The opposite corner, the lower right, is the extreme point of the canvas. For example, if your canvas is 1000 × 1000 pixels, then the coordinate for the lower right corner is x-axis = 1000 and y-axis = 1000.
You specify coordinate points that describe the shape you want to select as an array, which then becomes the argument or parameter value for the select() method.
The following example assumes that the ruler units have been set to pixels and create a selection by:
- Creating a variable to hold a new document that is 500 × 500 pixels in size.
- Creating a variable to hold the coordinates that describe the selected area (that is, the Selection object).
- Adding an array as the selection variable’s value.
- Using the Document object’s selection property, and the Selection object’s select() method to select an area. The area’s coordinates are the selection variable’s values.
var docRef = app.documents.add(500, 500) var shapeRef = [ [0,0], [0,100], [100,100], [100,0] ] docRef.selection.select(shapeRef)
Stroking the selection border
The following example uses the stroke() method of the Selection object to stroke the boundaries around the current selection and set the stroke color and width.
You can use the invert() method of the Selection object to a selection so you can work on the rest of the document, layer or channel while protecting the selection.
Expanding, contracting, and feathering selections
You can change the size of a selected area using the expand, contract, and feather commands.
The values are passed in the ruler units stored in Adobe Photoshop CS2 preferences and can be changed by your scripts. If your ruler units are set to pixels, then the following example will expand, contract, and feather by 5 pixels. See section “Setting application preferences” on page 32 for examples of how to change ruler units.
var selRef = app.activeDocument.selection selRef.expand( 5 ) selRef.contract( 5 ) selRef.feather( 5 )
Filling a selection
You can fill a selection either with a color or a history state.
To fill with a color:
var fillColor = new SolidColor() fillColor.rgb.red = 255 fillColor.rgb.green = 0 fillColor.rgb.blue = 0 app.activeDocument.selection.fill( fillColor, ColorBlendMode.VIVIDLIGHT, 25, false)
To fill the current selection with the tenth item in the history state:
Loading and storing selections
You can store Selection objects in, or load them from, Channel objects. The following examples use the store() method of the Selection object to store the current selection in a channel named My Channel and extend the selection with any selection that is currently in that channel.
selRef.store(docRef.channels["My Channel"], SelectionType.EXTEND)
To restore a selection that has been saved to a Channel object, use the load() method.
selRef.load (docRef.channels["My Channel"], SelectionType.EXTEND)
See section “Understanding clipboard interaction” on page 46 for examples on how to copy, cut and paste selections.
Working with Channel objects
The Channel object gives you access to much of the available functionality on Adobe Photoshop CS2 channels. You can create, delete, and duplicate channels or retrieve a channel’s histogram and change its kind. See “Creating new objects in a script” on page 27 for information on creating a Channel object in your script.
You can set or get (that is, find out about) a Channel object’s type using the kind property. See “Understanding and finding constants” on page 16 for script samples that demonstrate how to create a masked area channel.
Changing channel types
You can change the kind of a any channel except component channels. The following example demonstrates how to change a masked area channel to a selected area channel:
channelRef.kind = ChannelType.SELECTEDAREA
Using the DocumentInfo object
In Adobe Photoshop CS2, you can associate information with a document by choosing File > File Info.
To accomplish this task in a script, you use the DocumentInfo object. The following example demonstrates how to use the DocumentInfo object to set the copyrighted status and owner URL of a document.
docInfoRef = docRef.info docInfoRef.copyrighted = CopyrightedType.COPYRIGHTEDWORK docInfoRef.ownerUrl = "http://www.adobe.com"
For information about other types of information (properties) you can associate with a document, look up the Properties table for the DocumentInfo object in Part 2 of this book.
Using history state objects
Adobe Photoshop CS2 keeps a history of the actions that affect documents. Each time you save a document in the Adobe Photoshop CS2 application, you create a history state; you can access a document’s history states from the History palette by selecting Window > History.
In a script, you can access a Document object’s history states using the HistoryStates object, which is a property of the Document object. You can use a HistoryStates object to reset a document to a previous state or to fill a Selection object.
The following example reverts the document contained in the variable docRef back to the form and properties it had when it was first saved. Using history states in this fashion gives you the ability to undo modifications to the document.
docRef.activeHistoryState = docRef.historyStates
The example below saves the current state, applies a filter, and then reverts back to the saved history state.
savedState = docRef.activeHistoryState docRef.applyMotionBlur( 20, 20 ) docRef.activeHistoryState = savedState
Using Notifier objects
You use the Notifier object to tie an event to a script. For example, if you would like Adobe Photoshop CS2 to automatically create a new document when you open the application, you could tie a script that creates a Document object to an Open Application event.
Using the PathItem object
To add a PathItem object, you create an array of PathPointInfo objects, which specify the coordinates of the corners or anchor points of your path. Additionally, you can create an array of SubPathInfo objects to contain the PathPoint arrays.
The following script creates a PathItem object that is a straight line.
//line #1--it's a straight line so the coordinates //for anchor, left, and right //for each point have the same coordinates var lineArray = new Array() lineArray = new PathPointInfo lineArray.kind = PointKind.CORNERPOINT lineArray.anchor = Array(100, 100) lineArray.leftDirection = lineArray.anchor lineArray.rightDirection = lineArray.anchor lineArray = new PathPointInfo lineArray.kind = PointKind.CORNERPOINT lineArray.anchor = Array(150, 200) lineArray.leftDirection = lineArray.anchor lineArray.rightDirection = lineArray.anchor var lineSubPathArray = new Array() lineSubPathArray = new SubPathInfo() lineSubPathArray.operation = ShapeOperation.SHAPEXOR lineSubPathArray.closed = false lineSubPathArray.entireSubPath = lineArray