Publishers of technology books, eBooks, and videos for creative people

Home > Articles

The Edit Window

  • Print
  • + Share This
This chapter is from the book

Exercise 4: Create a Snare Track and a Hi-Hat Track

  1. Create two new tracks. Using the shortcut 170fig_01.jpg+Shift+N/Ctrl+Shift+N, make two new mono audio tracks set to Ticks. Name one “Snare” and the other “Hi Hat.” Make them both large.

  2. Drag the Snare. Zoom in to the first bar. Then drag two snare samples from the Region bin to Beat 2 of Bar 1, and Beat 4 of Bar 1 of the Snare track.

  3. Change the grid value. Let’s use eighth notes now instead of quarter notes for the grid value. Click on the tiny white triangle next to the grid value and choose 1/8 note. Notice that you have twice as many grid lines now, showing that you’re working with an eighth-note grid.

  4. Drag the Hat. Drag one hat sample from the Region bin to Bar 1, Beat 1 of your Hi Hat track.

  5. Select the Hat. Choose the Selector and highlight the Hi Hat track from Bar 1 to Bar 1/1/480. Your Event Edit area should look like this:

    Notice that the length of the highlight is 480 ticks. Remember that 960 ticks equals one quarter note, so 480 ticks is half of that, or one eighth note. The location 1/1/480 is simply the first eighth note of Bar 1, Beat 1.
  6. Duplicate the hat. With the one hat highlighted, hit 170fig_01.jpg+D/Ctrl+D to duplicate the hat seven times. You should now have eight hi-hats that fill Bar 1. This command will produce a metrically sensible rhythm only if the hi-hat audio region both starts and ends on the beat.

  7. Zoom out and highlight. Zoom out now to where you can see all eight bars. (Remember your Zoom Out shortcut, 170fig_01.jpg+[/Ctrl+[). With all eight bars showing, highlight the Snare track and the Hi Hat track from Bar 1 to Bar 2. To highlight both tracks, hold down the Shift key as you highlight. Notice that the decay of the snare sample is not being highlighted.

    Remember to keep an eye on your Event Edit area, which should show that you have highlighted from 1/1/000 to 2/1/000 and that the highlight length is exactly one bar.
  8. Repeat the Snare and Hat. This time, use Option+R/Alt+R or Edit > Repeat. Type “7” for the number of repeats and both selected areas will be repeated.

    You should now have eight bars of kick, snare, and hi hat.
  9. Highlight all eight bars. Another way to highlight is from the Event Edit area by typing in numbers. You must press the Enter key after typing in a number.

    You can also use the forward slash ( / )—on the numeric keypad, not the regular keyboard—as a shortcut to the Event Edit area’s Start and End times. Keep pressing / to reach each number field. Using the Event Edit area, make Bar 1/1/000 the Start and then make 9/1/000 the End. Your Event Edit area should show that you have a length of eight even bars. The regions in the tracks should now be highlighted for eight bars as well.
  10. Enable Loop Playback. With these eight bars highlighted, go to the Options menu and make sure that Loop Playback is checked. When Loop Playback is enabled, whatever you have highlighted in the Edit window will play in a continuous loop.

  11. Play and save. Now you can audition your continuous loop. Hit spacebar to play. The highlighted loop will play indefinitely until you press Stop.

    Now is a good time to save your project (170fig_01.jpg+S or Ctrl+S)—get in the habit of saving before you go on to the next task.
  • + Share This
  • 🔖 Save To Your Account